Out of stock
The Veepeak Rechargeable Motion Sensor Light offers a simple solution to light any area inside your home. The portable and detachable design makes it versatile enough to be used as a night light in hallways and bedrooms or as a cabinet or closet light for dim areas. The light is easily detachable from the magnetic strip, making installation and recharging a breeze.
Wireless Motion Activated
When ambient is dim (<5 lux, no need for full darkness), the light will automatically turns on once it detects motions; when no movement is detected for about 20 seconds, the light will automatically turn off.
1 – Off
2 – Always On
3 – Sensor Mode (100% Brightness)
4 – Power Saving Sensor Mode (40% Brightness)
Brightness: 90 lumens
LED Quantity: 14pcs
LED Life: 30,000 hours
Sensor Range: up to 3 meters, 120 degrees
Light Color: Daylight White
Battery Type: Built-in Lithium Battery (600mAh)
Charge time: about 3-4 hours (Blue LED indicator turns to Red)
Sensing Times: 3-4 hours at always on, 500 times at mode 3 or 1800 at mode 4
Size: 9.05 x 1.5 x 0.63 in (L x W x H)
Material: Aluminum + ABS
1 x Veepeak Rechargeable 14 LED Motion Sensor Light
1 x USB Charging Cable
1 x User Guide
The light has built-in light sensor so it won’t turn on if the ambient is bright or there is other lighting source. You can manually turn it on by toggling the switch to position 2.
To get the optimal sensing range, install the light where the PIR sensor (the cap) directly faces the direction you come.
The light can be used in many applications such as closet, cabinet, pantry, room, garage, safe, basement, or almost anywhere you need a portable light. However, do NOT install it in wet, high temperature area or near vent as the sensor may not function properly. Do NOT stick the magnetic strip onto some painted surface if the paint could easily come off when you remove it in the future.
Remove the light from the magnetic strip (they are attached by magnetic force) and use the included USB cable to recharge from a USB power source such as PC USB port, power bank, or USB power adapter. The charging time is about 2-4 hours and if it takes longer than that, try with another charging cable.
Unfortunately no. There is built-in light sensor that will keep the light from turning on if it detects that the ambient is not dim enough (or there is other light shining onto it). This is to save power for extended use.
Install the light with the motion sensor facing straightly the direction where people will come.
Please recharge the light and check if the light is installed in the right direction.
Please recharge the light and toggle the switch to position 2 (Always On) and see if it turns on.
Check the area brightness and if there is another lighting source. Then try placing the light in a dark room to see if it can be turned on by motions.
Try with another quality cable.
If you have any questions or issues with our products, please fill in and submit the form below and we will respond as soon as possible normally within 24 hours. You can check Register Your Product to get 6-month extended warranty.