Delivery Estimate: 2~4 Business Days.
Due to the COVID-19, there may be some delay.
Most items can be shipped to United States, Canada, Europe and Australia. Please check ship-to countries below for each item. If your country is not listed, please go to amazon.com to purchase.
iOS: iPhone, iPad
Android phone & tablet
Compatible APPs (more available on App Store and Google Play; check the app hardware compatibility)
iOS: OBD Fusion, DashCommand, OBD Auto Doctor, OBD Car Doctor, FourStroke, EOBD Facile, etc
Android: Torque Lite/Pro, OBD Auto Doctor, etc.
Supported OBD II Protocol
SAE J1850 PWM
SAE J1850 VPW
When using with a proper OBD2 App, you may:
Read and clear OBD II check engine light trouble codes
Reset check engine light
Pull many live sensor readings and get graph live data
Create your own dashboard
Know whether your vehicle is ready for emissions testing
And more to discover!
1 x Veepeak OBDCheck Pro WiFi OBD2 Reader
1 x User Manual
Our OBD2 products work with vehicles (including hybrids) sold in the United States in or after 1996. Vehicles in other regions that are OBD II / EOBD / JOBD may also be supported (Canada – 1998, European Union – 2001 (gas), 2004 (diesel), Australia – 2006 (gas), 2007 (diesel), etc.)
The OBD2 devices are normally designed to read check engine light. However, enhanced diagnostics on selected makes and models are also available when using the appropriate application. Please check with the application developer.
Our WiFi model (VP01) is compatible with iOS & Android phones and tablets while normal Bluetooth model (VP11) only works with Android. The Bluetooth 4.0 LE model (OBDCheck BLE) is compatible with both platforms.
You can leave the Bluetooth models plugged in if you are driving the vehicle frequently. Depending on the battery condition, if you leave your car sitting for days to weeks, we recommend that you remove the OBD2 device. We do not suggest that you leave the WiFi model plugged in if it’s not in use. WiFi consumes significantly more power than Bluetooth.
Install a proper OBD2 app on your phone. Plug the adapter into your car and turn the ignition key to ON or start the engine. Enable Bluetooth or WiFi depending on the model you have and connect to the device (OBDCheck BLE does not require Bluetooth pairing when using with iOS). Start the app and connect (connection setting may be required before connecting. Check the product manual).
A third-party OBD2 app is required to work with our wireless OBD2 devices. There are free and paid ones and some apps provide in-app purchase. Please check the product page for compatible apps and the app page for more information about the features and prices.
O2 Readings, EOT, EGT, Throttle, Boost, Speed, Fuel Trim, DPF Temp, Balance Rates and more.
Remember readable parameters depend on what’s installed on the OBDII system by the manufacturer. Generally, newer vehicles will give more readings and faster refresh speed. Please also note that more sensors you have on the list the refresh frequency is lower due to limited vehicle bus/OBD device throughput. Some readings like transmission temp are manufacturer-specific and you will need the custom PID. Contact the app developer to verify if it’s supported.
Try with a different phone/App/vehicle to see it happens again. If the connection drops and requires unplugging device and re-plugging in to connect again, please contact us for firmware update (OBDCheck BLE only).
Check if the device is powered on. If not, check the cigar fuse of your vehicle. If the device is powered on, make sure you are using a compatible phone/tablet and seeing the right place: WiFi list for VP01, Bluetooth list for VP11 & OBDCheck BLE.
Check the app hardware compatibility first. Then make sure the ignition key is at ON (or start the engine) and the correct connection settings is made in the App. Fully quit the app and re-start it to connect again.
Verify if your vehicle is OBD2 compliant and the ignition key is at ON (check the car manual for the right mode for diagnostics or just start the engine). Check if the OBD II connector is in good condition: no bad pins or wires, no corrosion. If it works with another vehicle, submit the connection log in the app so the app support can further check.
On iOS devices, you will see this error when trying to connect to Bluetooth LE devices from the system Bluetooth Setting. You do not need to connect here. Please reboot your iOS device so “VEEPEAK” shows up again. Then start the app to connect; the app will make the connection.
Try 1234 or 0000.
If you are using an Android phone, there is nothing to do to help. If you use an iOS device, you can switch to Static by inputting the following information for the WiFi so your cellular data is available:
IP 192.168.0.11, Subnet Mask 255.255.255.0 and Router 192.168.0.10.